Materials

Aluminium 3.4365/EN-AW7075 has high strength (57MPa), toughness and excellent resistance to fatigue. It has very good machinability.

Aluminium 3.3211/EN-AW6061 contains magnesium and silicon as its major alloying elements with trace amounts of copper.

Aluminium 3.3206/EN-AW6060 has good resistance to corrosion, good weldability and very suitable for cold forming.

Typically formed by rolling and extrusion, Aluminium 3.2315 has medium strength with very good weldability and thermal conductivity.

Aluminium 3.1645 is a short chipped aluminum alloy containing between 4.0 – 5.0% copper. It is very suitable for high machining speeds.

Compared to other carbon steels, Steel 1.0570 has high electrical conductivity but low thermal conductivity and low ductility.

Steel 1.0503 (C45) has low thermal conductivity and low ductility among wrought carbon steels. It has a high tensile strength of 630MPa.

Steel 1.7225 has high strength, toughness, good hardenability and resistance to impact. It is widely used in the construction of machines

Steel 1.7131 has high surface hardness and wear resistance with good machinability. It is ideal for machine components.

Steel 1.0038 can be formed into many products. Its excellent weldability makes it to be widely used in bridges, transmission towers etc.

Stainless Steel 1.4571 contains a small amount of titanium (about 0.5%). It has good machinability but cannot be hardened by heat treatment.

The addition of molybdenum results in improved corrosion resistance with good stability against chloric and non oxidizing acid.

Stainless steel 1.4301 is chromium-nickel austenitic stainless steel. The chromium element gives it excellent corrosion resistance.

Copper 2.0065 has high electrical conductivity. Its good machinability makes it easy to shape into different forms.

Copper 2.0060 has high conductivity and high corrosion resistance. It has a tensile strength of 360MPa. It has excellent machinability.

黃銅 2.0401 具有優異的熱成型性，便於焊接或釺焊，切削性能亦極佳。

Brass 2.0401 has excellent hot formability and can easily be soldered or brazed. It has very good free-cutting.

Titanium 3.7164 has exceptional strength compared to pure titanium but retains the same stiffness and thermal properties.

Titanium 3.7035 has excellent strength-to-weight ratio with good resistance to corrosion. Its thermal stresses are low.

Acrylic (PMMA) is the most common form of clear, moldable thermoplastic, often used in place of glass due to its higher resistance.

This is a whitish polyamide 12 powder that is glass filled. Its stiffness is excellent and it has good elongation at break.

This material produces functional parts of the highest quality. It has a well-balanced property profile with excellent constant behaviour.

This material is a metallic grey polyamide powder filled with aluminium. It has high stiffness and good post processing abilities.

Nylon produces parts with long-term durability that is similar to that of standard plastic parts. Excellent stability for a long time.

This material produces parts with blue colour. It consists of a food compliant PA11 powder. It is often applied in the production of nozzles.

This fibre composite material is made from the PA12 thermoplastic with approximately 35% carbon fibre about 0.15mm fibre length.

ABS M30 is a high impact resistant and tough material: it has a glass transition temperature of about 105°C.

PP (Polypropylene) has excellent resistance to moisture and chemicals, impressive impact strength and good elasticity.

CE 221 has long-term thermal stability with glass transition temperature of about 225°C. It has a tensile strength of 92MPA.

UMA 90 produces smooth surface finish with excellent mechanical properties. It has high stiffness and strength.

DPR 10 offers high accuracy and quick printability, and its rigidity makes it suitable for models and dies.

EPX 82 has an excellent blend of toughness, stiffness, temperature resistance and high tensile strength of 82MPa.

FPU 50 is robust and semi-rigid. It is suitable for applications that require toughness to withstand repetitive loading.

RPU 70 is a stiff material with high strength. It has moderate resistance to heat with heat deflection temperature of 60°C.

Xtreme White 200 Polypropylene has high elongation at break, high impact strength with excellent toughness. It is stiff and durable.

Xtreme Grey Polypropylene has excellent toughness and is resistant to breakage. It is ideal for snap fits used in electronic products.

Watershed XC is a low viscous material that produces parts that are strong, tough, water-resistant and most importantly, nearly colourless.

ULTEM 9085 has a high strength – to – weight ratio, high impact strength with good heat resistance. It is highly flame retardant.

ULTEM 1010 has the highest heat resistance, chemical resistance and tensile strength compared to other FDM thermoplastics.

PETG has significant chemical resistance, durability and good formability. It has low forming temperatures making it popular in consumer applications.

PLA is derived from renewable sources and is biodegradable. It can easily be melted and shaped without losing its mechanical properties.

PC – Like Heat Resist Translucent is best suited for parts that require high strength and stiffness with high temperature resistance.

PC – ABS Polycarbonate blends the ease of processing of ABS with the high strength and mechanical properties of PC.

The blend of Nylon 12 resin with chopped carbon fibre gives this material excellent structural properties.

Compared to the Nylon PA12, this has enhanced compressive strength with improved heat distortion temperature.

Nylon PA11 material is highly impact resistant with a shore hardness of 80. It is 100% biocompatible with up to 70% reusability.

ASA (Acrylonitrile Styrene Acrylate) is an amorphous thermoplastic with improved weather resistance. It is widely used in prototyping in 3D printing.

With a black appearance, ABS SL 7820 is rigid and tough. It allows for accurate and robust build with good surface finish and detail.

ABS ESD7 is a durable thermoplastic with electrostatic-dissipative properties. It is widely applied in the manufacturing of jigs and fixtures for electronic components.

Nylon PA 12 is one of the most popular 3D printing materials. It has good mechanical properties such as toughness and strength.

This material is a powder of a thermoplastic elastomer that is naturally coloured and rubber like. It produces fully functional parts.

Estane 3D TPU M95A has easy and quick printability. It is used in manufacturing projects that require both rubber and plastic properties.

EPU 40 is useful for ornaments and mechanical parts. It has high elastic behaviour under both tensile and compressive stress.

Tool Steel MS1 is a high wear resistant material with ultra-high strength and is easily machinable. It has enhanced ductility.

Stainless Steel 17.4 is a chromium-nickel copper steel with high strength and excellent toughness. It has a tensile strength of 1070N/mm2.

Aluminium 1706 has excellent strength at elevated temperatures (about 200°C). It has good resistance to corrosion and can be polished easily.

The addition of molybdenum results in improved corrosion resistance with good stability against chloric and non oxidizing acid.

Inconel 718 a nickel-chromium based high strength super alloy. It is resistant to corrosion and extreme pressure.

进口Somos Taurus材料，高韧性耐高温90℃,固化之后强度比ABS好一点，热性能和强度优良。

Opaque materials are good material choices for light functional testing, patterns, and prototypes. This material gives brilliant colour.

Typically formed by rolling and extrusion, Aluminium 3.2315 has medium strength with very good weldability and thermal conductivity.

Aluminium 3.3547 / EN AW-5083 is a rolled plate with moderate strength. It is widely used in the capital goods industry.

Compared to other carbon steels, Steel 1.0570 has high electrical conductivity but low thermal conductivity and low ductility.

Steel 1.0038 can be formed into many products. Its excellent weldability makes it to be widely used in bridges, transmission towers etc.

The addition of molybdenum results in improved corrosion resistance with good stability against chloric and non oxidizing acid.

Stainless steel 1.4301 is chromium-nickel austenitic stainless steel. The chromium element gives it excellent corrosion resistance.

PP (Polypropylene) has excellent resistance to moisture and chemicals, impressive impact strength and good elasticity.

PC – PBT has high toughness, dimensional stability and good resistance to heat and chemicals. It has good impact resistance and stiffness.

PA 6/6 is the most common variant of nylon used for engineering applications. It has a high melting temperature.

The fibers are tough but retain high tensile strength and elasticity. PA 6 is extremely resistant to wear and good electrical insulation.

Acrylic (PMMA) is the most common form of clear, moldable thermoplastic, often used in place of glass due to its higher resistance.

PLA is derived from renewable sources and is biodegradable. It can easily be melted and shaped without losing its mechanical properties.

PC – ABS Polycarbonate blends the ease of processing of ABS with the high strength and mechanical properties of PC.

ASA (Acrylonitrile Styrene Acrylate) is an amorphous thermoplastic with improved weather resistance. It is widely used in prototyping in 3D printing.

The ADC12 aluminium is more often used as an alternative for the A380 aluminium for parts that are highly intricate.

The A380 Aluminium gives an excellent combination of machinability, heat transfer and easy casting together with other properties.